Precautions of Bottle Water Pump and the cause of loud noise

Bottle Water Pumps are often used in our daily lives. A Bottle Water Pump is a machine that transports liquids or pressurizes liquids. Next, let's take a look at the precautions of the Bottle Water Pump and the reasons for the loud noise. Here are some answers.

Here is the content list:

• Precautions of the Bottle Water Pump.

• The reason for the loud noise of the Bottle Water Pump.

Precautions of the Bottle Water Pump.

When the bottom valve of the Bottle Water Pump leaks, some people fill the inlet pipe of the Bottle Water Pump with dry soil and flush the bottom valve with water, which is undesirable. This is because when the dry soil is put into the water inlet pipe when the Bottle Water Pump starts to work, the dry soil will enter the pump, which will damage the impeller and bearings, which shortens the service life of the Bottle Water Pump. When the bottom valve leaks, it must be repaired. If it is serious, it needs to be replaced with a new one.

After using the Bottle Water Pump, you must pay attention to maintenance. For example, when the Bottle Water Pump is used up, the water in the pump should be drained. It's best to get rid of the chicha and rinse it with clean water. The tape on the Bottle Water Pump ought to even be removed, and so rinsed with water and dried within the lightweight. Don't place the tape in a dark and wet place. The tape should not be stained with oil, plus apply one thing sticky on the tape.

If the Bottle Water Pump has any minor faults, keep in mind to not let it work. If the packing of the pump shaft is drained, it ought to be additional in time. If you still use the Bottle Water Pump, it'll leak air. The direct result of this is often that the energy consumption of the motor can increase, which can harm the blade. Additionally, if the Bottle pump vibrates powerfully throughout use, you need to stop and check the cause, otherwise, the Bottle Water Pump also will be broken. Additionally, fastidiously check whether or not their area unit cracks on the blade, whether or not the blade is fastened on the bearing is loose, if there are unit cracks and movableness, repair it in time, and stop working if there's dirt on the blade.

The reason for the loud noise of the Bottle Water Pump.

First, the impact of the rotary vane on the cylinder, the residual volume of the Bottle Water Pump, and the sound of the pressure oil in the exhaust dead space. Second, the impact of the exhaust valve plate on the valve seat and the support. Third, the echo and bubble bursting sound in the box. Fourth, bearing noise. Fifth, the noise caused by a large amount of gas and oil hitting the oil baffle. Sixth, the noise caused by the transmission, such as the fan noise of the Bottle Water Pump. Seventh, motor noise.

If you want to buy the Bottle Water Pump, you can contact us. Our official website is https://www.homaster.com/. Our company has always made unremitting efforts to become a professional Bottle Water Pump supplier in the industry.