











Analysis of Bottle Water Pump vibration causes there are many reasons for the vibration of the unit and the pump house building. Some factors are both connected and interacting. In summary, there are mainly the following four reasons. Here are some answers.
Here is the content list:
Electrical aspect
Mechanical aspect
Hydraulic and other aspects
The motor is the main equipment of the Bottle Water Pump unit. The internal magnetic imbalance of the motor and the imbalance of other electrical systems often cause vibration and noise. For example, in the operation of an asynchronous motor, the radial alternating magnetic tension between the stator and rotor generated by the interaction of the stator, and rotor tooth harmonic magnetic flux, or a large synchronous motor in operation, the stator and rotor magnetic center is inconsistent or the air gap difference in all directions exceeding the allowable deviation value may cause the motor to periodically vibrate and make noise.
Motor and Bottle Water Pump rotating parts have unbalanced quality, shoddy manufacturing, poor installation quality, the unsymmetrical axis of the unit, swing exceeding the allowable value, poor mechanical strength and rigidity of parts, and wear and tear of bearings and sealing parts. As well as the resonance caused by the critical speed of the Bottle Water Pump and the natural frequency of the unit, strong vibration and noise will be generated.
Uneven flow rate and pressure distribution at the inlet of the Bottle Water Pump, pressure pulsation of the working fluid at the inlet and outlet of the pump, liquid bypass, drift and de-flow, non-rated working conditions, and bottle water pump cavitation caused by various reasons are common. The cause of the vibration of the pump unit. The dynamic transitional process of Bottle Water Pump startup and shutdown, valve opening and closing, changes in working conditions, and emergency shutdown of accidents caused rapid changes in pressure in the water pipeline and water hammer, which often caused vibrations in the pump room and unit.
The unreasonable design of the unit inlet flows path or the unmatched unit, the improper submergence depth of the Bottle Water Pump, and the unreasonable sequence of starting and stopping the unit will deteriorate the water inlet conditions, generate vortexes, induce cavitation, or aggravate the vibration of the unit and pump room. When the unit that uses the vacuum interrupter to break the siphon is started, if the air entrainment in the hump section is difficult, the siphon time is too long. The design of the shutter door of the unit with the shut-off of the shutter door is unreasonable. Uneven settlement of the foundation supporting the Bottle Water Pump and the motor or poor rigidity of the foundation will also cause the unit to vibrate.
When users choose Bottle Water Pump, they must recognize the manufacturer. It is recommended to give priority to the purchase of water-filled submersible electric pumps and to see the brand and product quality certificate. Do not purchase "three noes" (that is, no manufacturer, no production date, no production license) products, otherwise, there will be problems and users will be at a loss. For more questions about Bottle Water Pump, please contact HOMASTER. Years of accumulated R&D and production experience will provide you with more product services and technical support! Our official website is https://www.homaster.com/.
A Water Purifier is a common household appliance in modern life. People who want to buy Water Purifier need to know the precautions for their purchase, and people who want to use Water Purifier need to know the precautions for its use. Today we will talk about the purchase precautions and use precautions of Water Purifiers. Here are some answers.
Here is the content list:
Water Purifier purchase precautions.
Precautions for the use of a Water Purifier.
To understand the local water quality.
Before purchasing a household Water Purifier, you must first understand the local water quality. Because its function is designed by the water quality of each place, and the water quality of each place is different, there are also certain differences in the function of the Water Purifier. For the southern region, the content of heavy metals in the water will be relatively small, so the Water Purifier with ordinary filter elements is used. But for the northern regions, the heavy metal content in the water is relatively high, and the water quality is harder, so you must choose a reverse osmosis type Water Purifier.
Confirm the purpose of water use.
When choosing a Water Purifier, you need to confirm your water use purpose and see if it is direct drinking water or domestic water. If it is domestic water, it is recommended to choose the whole house water purification method, but this kind of pipeline needs to be arranged in advance during the decoration process, which requires more. However, there are not so many requirements for drinking water directly, and you can choose directly according to the needs of the family.
Water Purifier must keep the ultrafiltration membrane filter element in a moist state after each use. If it is dried, water should be added in time to improve, because it will cause a significant drop in water production. In addition, when the Water Purifier breaks down, the power supply should be cut off immediately, the water inlet valve should be closed, and it should not be disassembled at will. It is best to find professional after-sales personnel to repair it.
If you don't use Water Purifier for a long time, keep it well and don't let the dirt stay in it for too long, so as not to affect the water quality in later use.
Water Purifier' water production is closely related to water quality. If the water is good, the water production will increase, and if the water quality is poor, the water production will decrease. Therefore, the water quality should be tested based on water production. If the tap water is stopped, the remaining water must be drained, and the water must be drained to drain the sediment and rust in the water pipe before reuse.
If you are engaged in work related to Water Purifier or want to learn more about our company, you can communicate with us on the website. Our official website is https://www.homaster.com/.
As water pollution in our country becomes more and more serious, our drinking water safety is becoming more and more difficult to guarantee. This has led more and more people to buy water purification products such as Water Purifiers. Water Purifiers can indeed purify water to a certain extent, but if we do not pay attention to its maintenance, its water purification ability will gradually be lost. Next, let's take a look at how we can do the daily maintenance and maintenance of the Water Purifier. Here are some answers.
Here is the content list:
Clean the Water Purifier regularly.
Replace the Water Purifier filter element regularly and in time.
If it is not used for more than 3 days, cut off the water source and rest.
The outer body of the Water Purifier is clean.
Just use a clean damp cloth for simple cleaning. It should be noted that in the cleaning process, you should avoid using detergent or soap as much as possible to prevent it from falling into the Water Purifier and affecting the water quality.
The inside of the Water Purifier is flushed regularly.
To keep the interior of the Water Purifier clean, it is generally flushed at least once a week. Most households now use a smart Water Purifier, just press the backwash button, it can automatically rinse. The more advanced Water Purifier is equipped with automatic timing flushing and backflushing functions, so there is no need to worry about the trouble of flushing.
The Water Purifier disinfects the whole machine.
Generally, it takes half a year to once a year, and most of them use the ozone whole machine for disinfection. It is best to make an appointment for the whole machine disinfection treatment at a regular Water Purifier manufacturer. In addition, after encountering extreme weather, such as typhoons, floods, earthquakes, etc. The whole machine needs to be disinfected to prevent infectious viruses from falling into the Water Purifier.
Usually what we call the service life of the Water Purifier is the service life of the filter element. In this regard, some people even compare the filter element to the heart of the Water Purifier, showing the importance of the filter element. If the filter element is not replaced for a long time or the filter element is not replaced in time, the accumulation of dirt and bacteria on the filter element will weaken the purification effect of the Water Purifier, and the safety and health of the water cannot be guaranteed. In addition, Water Purifier is a combination of multiple different types of filter elements to complete the purification and filtration, and the service life of different filter elements is different. To ensure water quality, the filter element must be replaced regularly by Water Purifier's instructions.
If the Water Purifier is not used for more than 3 days, it is best to cut off the water source and let the Water Purifier take a good rest. Prevent the "water hammer" impact caused by unstable water pressure, causing damage to Water Purifier related parts.
For more Water Purifier related questions, please consult HOMASTER. Our official website is https://www.homaster.com/. You can communicate with us on the website.
HOMASTER was established in 1999, one of the largest leading manufacturer in Ningbo CHINA, which specializes in producing water dispenser, water purifier, water pump etc.
With the strong design, manufacturer, sales and after service ability, our sales area even reached more than 50 countries all over the world.
HOMASTER covers area more then 50,000 square meters,including plastic insjection workshop,processing workshop,assembling workshop and testing workshop etc.
And we have staffs more than 1000, including 75 excellent executives and technology engineers.
With the international advanced assembling and testing lines with the strict quality management,all our products have CCC certification, most of them have CE, GS,CB and SASO certification.
Our target : Leading the trend of water dispenser.
Our promise: Quality, Value and Service.
We are willing to get a chance to cooporate with you no matter on business relationship or technical consulting.