











Your home disposable cups are placed where, is not particularly easy to mess, bad clean-up and unhygienic? Now we recommend a Cup Dispenser, which is convenient and does not take up space for a variety of places. Take the lid of the Cup Dispenser design beautiful dust cup, not waste more health. It is a large capacity, do not always have to stare at the cup is enough, card grip design, each time you take a bottom buckle can be stuck in the cup body gently pulled down. Do you know how to use the Cup Dispenser?
Here is the content list:
•Function principle and method
•Installation of the Cup Dispenser
•How to clean the Cup Dispenser?
Cup Dispenser is a card grip design, each time you take one, the bottom buckle can be stuck in the cup gently pulled down, so that is convenient and hygienic, will not contaminate the above disposable cups not used more quickly and conveniently. We just need to open the lid on the top of the Cup Dispenserto put the paper cups, which can be easily organized and stored. And the cup holder is easy to install, it can be easily fixed to the machine or wall side of the machine.
There are two kinds of Cup Dispenser installation, one is the Cup Dispenser that needs to be punched and the other is the Cup Dispenser that does not need to be punched, each of these two kinds has different advantages. Do not need to punch the Cup Dispenser use upgrade glue, even if we pull hard will not fall off, very suitable for tile glass, walls, wood, latex paint surface, and so on. The other one is to punch holes for installation, we need to find the location where you want to place the Cup Dispenser, and then use your hands to fix the Cup Dispenser in the wall to find the location of the need to punch a hole and then make a mark to prevent it from being installed crooked. After finding the right location, use the screws to fix the Cup Dispenser on it.
First of all, we need to remove the Cup Dispenser before cleaning, we can use a screwdriver to unscrew the screws, and then you can take off the dispenser, if you use a non-perforated dispenser, we can gently tear off the glue used to fix the Cup Dispenser. Then use the cleaner (disinfectant water, toothpaste, detergent, and other cleaners can be) with a small brush with water to gently brush the surface of the Cup Dispenser and inside. After brushing, remember to dry the water before you can continue to use it. Finally, use the method of installing the Cup Dispenser to install it on.
These are the methods of how to use the Cup Dispenser. With the popularity of Cup Dispensers in our lives, it is necessary for us to know these methods. If you need Cup Dispenser, you can consider our cost-effective products. HOMASTER materials are non-toxic and tasteless, perfect after-sales service, you can have no worries.
Cup Dispenser is a storage tool for storing cups, which is widely used in supermarkets, restaurants, schools, cafeterias, and other places. More and more Chinese families will use the cup dispenser, and it will be one of the daily household storage products in the future. The Cup Dispenser sold by our company is not easy to produce corrosion, pitting, rust, wear resistance, durable, magnificent and bright appearance, fashionable and durable. It can add design color to the bland and tasteless life. So how do we measure the Cup Dispenser?
Here is the content list:
•Measurement of the cups
•Measurement of the appearance of the cup holder
Prepare the cup you want to store, measuring tape (if the cup is relatively small it is recommended to use a soft ruler to measure, the data obtained will be more accurate, if there is no soft ruler can first measure the length of the rope and then use the ruler to measure the length of the rope). Measurement is necessary to straighten the rope, both ends in the same horizontal plane to ensure the accuracy of the reading. We can directly measure the height of the outside of the cup, the maximum diameter of the cup will be fine. Finally, the value is read in conjunction with the actual situation. Prepare for the selection of the size of the Cup Dispenser to avoid the purchase of a Cup Dispenser of the wrong size. If there are cups in the outer packaging has the size of the size can not be measured.
If you want to match your furniture, home decoration style, you can choose a suitable size of the Cup Dispenser. Tools to measure the appearance of the Cup Dispenser are soft rulers (you can use a string with a straight edge instead). The first step is to measure the height of the cup dispenser. Note that the measurement to keep the soft ruler (rope) is straight, and the head and tail to the same level, otherwise the measured value will not be accurate enough. The second step is to measure the maximum width of the fixed surface. The third step is to measure the minimum width of the fixed surface. The fourth step is to determine the specific location of the maximum and minimum widths of the fixed surface in height. This way you can get how much fixing area you need to leave for the Cup Dispenser.
Measurement inside the cup dispenser
This step is more difficult for us to prepare tools such as a soft ruler (you can use straightedge and string instead) and small stones. Fix the small stone with double-sided tape on the end of the soft ruler or string, and then stick the soft ruler or string inside the cup dispenser to get the height of the inside of the Cup Dispenser. Note that the volume of the small stone can not be too large, not to make the soft ruler or rope deformation; weight can not be too small or the soft ruler or rope can not be completely straight will produce errors. Measuring the internal width of the Cup Dispenser is easier than measuring the height, we just need to remove the dust cover to measure the diameter of the empty part. This way we measured the height and width of the interior of the Cup Dispenser.
These are the steps and methods needed to measure the Cup Dispenser, which can help us find a more suitable one. If you need Cup Dispenser, you can consider our cost-effective products.
We will use the Cup Dispenser many times in life, life dispenser is divided into two broad categories, one is the bar catering industry professional Cup Dispenser, mostly made of stainless steel, suitable for the use of a large number of cups, for the ready-to-use sales service can be beautiful, fast and efficient. The second category that is more suitable for home use, is a model of the creative home invention. It can be said that most users can be used, whether for their use or to receive guests, are very convenient and hygienic. So how do we specifically choose the right Cup Dispenser?
Here is the content list:
•Choose the cup dispenser according to the place of use
•Choose the cup dispenser according to the style of decoration
•Choose a cup dispenser based on performance requirements
Customers can choose different Cup Dispensers according to the different places where they are used. For example, in the catering industry, most people will choose stainless steel Cup Dispensers, and the size of the dispenser will be larger (which can be selected according to the size of the customer's cup), and the capacity will be larger than other places because the flow of customers in the catering industry is very large. Choose stainless steel Cup Dispenser is easier to clean, not easy to stain, will give people a "very clean" feeling, so in the restaurant industry, stainless steel Cup Dispenser is more popular with customers.
In supermarkets, smaller, plastic Cup Dispensers are usually chosen. Because the role of the Cup Dispenser in the supermarket is mainly to store the disposable cups for customers to try new drinks, these cups are usually smaller. And the price of using plastic Cup Dispensers is more cost-effective.
When using Cup Dispensers at home, you can choose according to the different decoration styles. For example, if the home's decorative style is on the cool side, we can use a clear plastic Cup Dispenser, which will look more clean and tidy home. If the home decoration style is brighter, we can also choose the Cup Dispenser according to the color.
Cup Dispensers made from polycarbonate are lighter and more durable. Polycarbonate is an amorphous polymer with excellent insulation, extensibility, stability, heat and cold resistance, chemical resistance, and melting and cooling into a transparent glass-like material with excellent optical and mechanical properties. Stainless steel Cup Dispenser is sturdy, unbreakable, durable, and beautiful; it can be used for a long time; it has been widely used although it has only recently started to be used. Different materials determine their different properties, and customers can buy them according to their needs.
Cup Dispenser is an easy-to-use accessory, mainly for easy access to disposable cups and the use of storage supplies. HOMASTER many tests of Cup Dispenser, and the quality qualification rate is guaranteed. If you need Cup Dispenser, you can consider our cost-effective products. HOMASTER materials are non-toxic and tasteless, perfect after-sales service, you can have no worries.
There are many types of Water Purifiers, such as water softeners, direct drinking machines, pure water machines, and so on. Different Water Purifier installation methods are not the same, but the installation of Water Purifiers generally has to go through several similar steps. Next, the installation steps of the Water Purifier will be introduced in detail. Here are some answers.
Here is the content list:
Install Water Purifier accessories
Install Water Purifier host
Connect the water inlet tee
Connect water inlet, water outlet, sewage outlet
Flushing and debugging
Before installation, check whether the accessories are complete, and check whether all the pipelines, joints, faucets, and other water fittings of the Water Purifier are complete. Unpack the products that need to be assembled on-site and assemble them. Some Water Purifiers need to install special faucets, such as Water Purifiers and direct drinking machines. Some Water Purifier and softener are not required. The water purification faucet is mostly a gooseneck faucet, which is generally installed on the conditioning table of the kitchen and needs to be installed with holes.
When installing the water purifier, insert the unpacked RO membrane with two black "O" rings into the RO membrane tube until it feels inserted to the end, and then tighten the RO membrane tube end cap. Then remove the RO membrane pipe inlet PE pipe and place it in a container, turn on the water source and turn on the power of the Water Purifier, fill the first three pre-treatment filter housings with water, and let the black pre-filtered water flow out. After the black water has run out, turn off the power of the Water Purifier, and then install the removed RO membrane pipe into the water PE pipe.
After the Water Purifier host is installed, connect the water inlet tee next. Turn off the main tap water switch, wrap the threaded inlet of the ball valve with raw material tape several times, and then directly connect the PE pipe to the side hole of the water inlet tee, and connect the PE pipe to the outlet of the ball valve.
Measure the distance and cut out the PE pipe, connect the water inlet tee to the PE pipe and then connect to the water inlet of the Water Purifier. Connect the PE pipe to the water inlet of the host, and the water inlet of the integrated machine and box-type water purifier is located on the outside of the machine. Connect the PE pipe to the post-activated carbon, here is the water outlet. When connecting the sewage outlet, the connection pipe is here, and it can be opened once a month for 10 minutes at a time.
Then turn on the Water Purifier switch and let the water in for 20 minutes to rinse. Some black water will wash out. This is normal. This is a small amount of activated carbon powder. Don't drink the water for the first time or two. Put in the water a few times, and the water quality will be more stable. You can drink it straight away.
For more Water Purifier related questions, please consult HOMASTER. Our official website is https://www.homaster.com/.
Portable Water Dispenser is now one of the more commonly used household appliances. Whether it is office workers, travel parties, dormitory parties, or moms, it is very convenient to use drinking water, and it is also the correct way to open drinking water, but how to buy it Woolen cloth? You need to know more about the product. There are many brands of Portable Water Dispenser, and their functional characteristics meet your needs. So, let's take a look at how to choose Portable Water Dispenser? Here are some answers.
Here is the content list:
The appearance style of Portable Water Dispenser.
Water intake of Portable Water Dispenser.
Portable Water Dispenser heating time.
The temperature range of Portable Water Dispenser.
The detailed design of Portable Water Dispenser.
Traditional water Dispenserrs are relatively bulky and inconvenient to use. So when you buy Portable Water Dispenser, choose a water Dispenserr with a compact appearance. For example, HOMASTER Portable Water Dispenser has a simple design, is small in size, does not occupy space during use, and looks more beautiful.
The main function of a Portable Water Dispenser is to provide hot water. When purchasing, you must also consider its water intake and capacity. The Portable Water Dispenser that can only be used with a single water intake has a lot of inconveniences. Therefore, the Portable Water Dispenser with multiple water inlet methods is more convenient to use, whether it is used by one person or by multiple people, it can meet the drinking water needs.
Many people want to drink hot water right away when they drink water, so when choosing Portable Water Dispenser, they must choose Portable Water Dispenser with an instant heating function. Hot water is produced in 3 seconds, and there is no need to drink water. Wait and heat up quickly, making it more convenient to use.
When everyone chooses Portable Water Dispenser, try to choose the Portable Water Dispenser with multi-level adjustment. Because you usually need to make milk, tea, coffee, or warm water to use hot water, these water scenarios have different choices of water temperature, so you should choose the Portable Water Dispenser with multi-stage adjustment.
In addition to the essential functions of Portable Water Dispenser, it is also necessary to consider whether some detailed designs of Portable Water Dispenser are in place, such as whether the button design of Portable Water Dispenser and the body design conform to ergonomics. There are also detailed designs such as whether the Portable Water Dispenser is stable when placed on the desktop and whether it has a child lock protection function.
For more questions about Portable Water Dispenser, please contact HOMASTER. Years of accumulated R&D and production experience will provide you with more product services and technical support! Our official website is https://www.homaster.com/.
HOMASTER was established in 1999, one of the largest leading manufacturer in Ningbo CHINA, which specializes in producing water dispenser, water purifier, water pump etc.
With the strong design, manufacturer, sales and after service ability, our sales area even reached more than 50 countries all over the world.
HOMASTER covers area more then 50,000 square meters,including plastic insjection workshop,processing workshop,assembling workshop and testing workshop etc.
And we have staffs more than 1000, including 75 excellent executives and technology engineers.
With the international advanced assembling and testing lines with the strict quality management,all our products have CCC certification, most of them have CE, GS,CB and SASO certification.
Our target : Leading the trend of water dispenser.
Our promise: Quality, Value and Service.
We are willing to get a chance to cooporate with you no matter on business relationship or technical consulting.
A Bottle Water Pump is also called a water pump. A machine that uses an electric motor, diesel engine, or hydraulic drive to lift water from a low place to a high place. Do you know how to distinguish the authenticity of the Bottle Water Pump? Here are some answers.
Here is the content list:
The difference between the original Bottle Water Pump and the counterfeit Bottle Water Pump.
Observe the appearance of the Bottle Water Pump.
Look at the spare parts of the Bottle Water Pump.
The packaging of the original Bottle Water Pump or supporting manufacturers is generally standard, with clear and formal writing, with detailed product names, specifications and models, registered trademarks, factory names, factory addresses, and telephone numbers. Counterfeit accessories are generally rough in packaging, and the address and name of the factory are not printed. It is worth noting that some Bottle Water Pumps are refurbished from used accessories. At this time, the old paint can be found after removing the paint on the surface of the accessories. Such Bottle Water Pumps are best not to be used.
Qualified Bottle Water Pump has a smooth surface and good workmanship. The more important the spare parts, the higher the processing accuracy, and the stricter the rust and corrosion protection of the packaging. If the parts are found to have rust spots or cracks in the rubber parts, loss of elasticity, or visible processing lines on the surface of the journal when purchasing, they should not be the original parts. The inferior Bottle Water Pump looks good sometimes. However, due to the poor production process, it is easy to be damaged. When purchasing, you can see the quality of the accessories by observing the hidden parts such as the edges and corners of the accessories.
To ensure that the assembly relationship of the Bottle Water Pump meets the technical requirements, some regular parts are engraved with assembly marks to ensure the correct installation of the parts. If there is no mark or the mark is blurred and cannot be identified, it is not a qualified part.
The regular Bottle Water Pump assembly and parts must be in good condition to ensure smooth installation and normal operation. Some small parts on the assembly are missing, which makes it easy to start loading the car and causes difficulties. These kinds of accessories may be counterfeit accessories. In addition, some important accessories, especially assemblies, usually have manuals and certificates when they leave the factory to guide users to install, use and maintain. Counterfeit assemblies generally do not have detailed installation instructions to guide them.
If you are engaged in work related to Bottle Water Pump or want to learn more about our company, you can communicate with us on the website. Our official website is https://www.homaster.com/. Our cost-effective products are well received by everyone.