











Analysis of Bottle Water Pump vibration causes there are many reasons for the vibration of the unit and the pump house building. Some factors are both connected and interacting. In summary, there are mainly the following four reasons. Here are some answers.
Here is the content list:
Electrical aspect
Mechanical aspect
Hydraulic and other aspects
The motor is the main equipment of the Bottle Water Pump unit. The internal magnetic imbalance of the motor and the imbalance of other electrical systems often cause vibration and noise. For example, in the operation of an asynchronous motor, the radial alternating magnetic tension between the stator and rotor generated by the interaction of the stator, and rotor tooth harmonic magnetic flux, or a large synchronous motor in operation, the stator and rotor magnetic center is inconsistent or the air gap difference in all directions exceeding the allowable deviation value may cause the motor to periodically vibrate and make noise.
Motor and Bottle Water Pump rotating parts have unbalanced quality, shoddy manufacturing, poor installation quality, the unsymmetrical axis of the unit, swing exceeding the allowable value, poor mechanical strength and rigidity of parts, and wear and tear of bearings and sealing parts. As well as the resonance caused by the critical speed of the Bottle Water Pump and the natural frequency of the unit, strong vibration and noise will be generated.
Uneven flow rate and pressure distribution at the inlet of the Bottle Water Pump, pressure pulsation of the working fluid at the inlet and outlet of the pump, liquid bypass, drift and de-flow, non-rated working conditions, and bottle water pump cavitation caused by various reasons are common. The cause of the vibration of the pump unit. The dynamic transitional process of Bottle Water Pump startup and shutdown, valve opening and closing, changes in working conditions, and emergency shutdown of accidents caused rapid changes in pressure in the water pipeline and water hammer, which often caused vibrations in the pump room and unit.
The unreasonable design of the unit inlet flows path or the unmatched unit, the improper submergence depth of the Bottle Water Pump, and the unreasonable sequence of starting and stopping the unit will deteriorate the water inlet conditions, generate vortexes, induce cavitation, or aggravate the vibration of the unit and pump room. When the unit that uses the vacuum interrupter to break the siphon is started, if the air entrainment in the hump section is difficult, the siphon time is too long. The design of the shutter door of the unit with the shut-off of the shutter door is unreasonable. Uneven settlement of the foundation supporting the Bottle Water Pump and the motor or poor rigidity of the foundation will also cause the unit to vibrate.
When users choose Bottle Water Pump, they must recognize the manufacturer. It is recommended to give priority to the purchase of water-filled submersible electric pumps and to see the brand and product quality certificate. Do not purchase "three noes" (that is, no manufacturer, no production date, no production license) products, otherwise, there will be problems and users will be at a loss. For more questions about Bottle Water Pump, please contact HOMASTER. Years of accumulated R&D and production experience will provide you with more product services and technical support! Our official website is https://www.homaster.com/.
We will use the Cup Dispenser many times in life, life dispenser is divided into two broad categories, one is the bar catering industry professional Cup Dispenser, mostly made of stainless steel, suitable for the use of a large number of cups, for the ready-to-use sales service can be beautiful, fast and efficient. The second category that is more suitable for home use, is a model of the creative home invention. It can be said that most users can be used, whether for their use or to receive guests, are very convenient and hygienic. So how do we specifically choose the right Cup Dispenser?
Here is the content list:
•Choose the cup dispenser according to the place of use
•Choose the cup dispenser according to the style of decoration
•Choose a cup dispenser based on performance requirements
Customers can choose different Cup Dispensers according to the different places where they are used. For example, in the catering industry, most people will choose stainless steel Cup Dispensers, and the size of the dispenser will be larger (which can be selected according to the size of the customer's cup), and the capacity will be larger than other places because the flow of customers in the catering industry is very large. Choose stainless steel Cup Dispenser is easier to clean, not easy to stain, will give people a "very clean" feeling, so in the restaurant industry, stainless steel Cup Dispenser is more popular with customers.
In supermarkets, smaller, plastic Cup Dispensers are usually chosen. Because the role of the Cup Dispenser in the supermarket is mainly to store the disposable cups for customers to try new drinks, these cups are usually smaller. And the price of using plastic Cup Dispensers is more cost-effective.
When using Cup Dispensers at home, you can choose according to the different decoration styles. For example, if the home's decorative style is on the cool side, we can use a clear plastic Cup Dispenser, which will look more clean and tidy home. If the home decoration style is brighter, we can also choose the Cup Dispenser according to the color.
Cup Dispensers made from polycarbonate are lighter and more durable. Polycarbonate is an amorphous polymer with excellent insulation, extensibility, stability, heat and cold resistance, chemical resistance, and melting and cooling into a transparent glass-like material with excellent optical and mechanical properties. Stainless steel Cup Dispenser is sturdy, unbreakable, durable, and beautiful; it can be used for a long time; it has been widely used although it has only recently started to be used. Different materials determine their different properties, and customers can buy them according to their needs.
Cup Dispenser is an easy-to-use accessory, mainly for easy access to disposable cups and the use of storage supplies. HOMASTER many tests of Cup Dispenser, and the quality qualification rate is guaranteed. If you need Cup Dispenser, you can consider our cost-effective products. HOMASTER materials are non-toxic and tasteless, perfect after-sales service, you can have no worries.
A Water Purifier is water treatment equipment that performs deep filtration and purification of water according to the requirements of water use. A Water Purifier usually refers to a small purifier for household use. The core of its technology is the filter membrane in the filter element device. The main technology comes from three types of ultrafiltration membranes, RO reverse osmosis membranes, and nanofiltration membranes. Next, follow me to take a look at the filtering and classification of Water purifiers.
Here are some answers.
Here is the content list:
Water Purifier filtration.
Classification of Water Purifier.
Generally, ultrafiltration machines and pure water machines are used in households, and the standard number of filtration stages is 5. Under normal circumstances, after filtering through the Water Purifier, the water can reach the standard of pure water, and the water does not contain any impurities. This water can be used directly for drinking. Water Purifier differs according to the filter element combination, and the level of filtration is also different. In line with water purification technology, Water purifiers are divided into filtration, activated carbon adsorption, membrane technology, electrolysis technology, dissolution, mineralization, magnetization, etc. Of course, what involves membrane technology is the core of Water purifiers, and it is also the core embodiment of water purifier products.
Water Purifiers are divided into 2 classes in line with the pipeline style grade: step-by-step adjustment Water purifiers and self-cleaning Water purifiers. The normal Water setup may be a step-by-step adjustment Water setup. Its internal pipeline is designed to be loose before the filter element is tightened. There are PP melt blown filter elements, granular carbon, compressed carbon, RO reverse osmosis membrane or ultrafiltration membrane, and post activated carbon. The 5 levels are connected end to end in sequence. The retentate is deposited within the filter component and wishes to be manually disassembled and washed frequently to confirm the traditional operation of the machine.
The other may be a lot of advanced self-cleaning Water setup. Two channels square measure designed within the Water Purifier and a laundry water channel are other. It is used as washing water for ordinary daily life. When passing through the passage, it flushes the internal filter element, especially the raw water side of the membrane filter element to achieve self-cleaning, and uses the moment when the faucet is opened and closed, that is, the water that flows away from the first and the end of the faucet to remove the trapped dirt in time. This structure is designed reasonably, eliminating the trouble of manual disassembly and washing, avoiding re-pollution of the organization itself, and at the same time, reducing energy consumption costs.
In layman's terms, the self-cleaning Water Purifier is equivalent to a garbage disposer installed in the pipeline, and the dirt is removed at any time without staying in the machine. The traditional non-self-cleaning Water Purifier is equivalent to putting multiple trash cans in the room, and the dirt is usually temporarily stored in the machine, thus it has to be drained, removed, and washed frequently, and also the filter component has to get replaced ofttimes.
Our official website is https://www.homaster.com/. If you are engaged in work related to Water Purifier or want to learn more about our company, you can communicate with us on the website. Our company adheres to the corporate culture of "quality-oriented, customer first", and has always made unremitting efforts to become a professional Water Purifier supplier in the industry.
Cup Dispenser is a storage tool for storing cups, which is widely used in supermarkets, restaurants, schools, cafeterias, and other places. More and more Chinese families will use the cup dispenser, and it will be one of the daily household storage products in the future. The Cup Dispenser sold by our company is not easy to produce corrosion, pitting, rust, wear resistance, durable, magnificent and bright appearance, fashionable and durable. It can add design color to the bland and tasteless life. So how do we measure the Cup Dispenser?
Here is the content list:
•Measurement of the cups
•Measurement of the appearance of the cup holder
Prepare the cup you want to store, measuring tape (if the cup is relatively small it is recommended to use a soft ruler to measure, the data obtained will be more accurate, if there is no soft ruler can first measure the length of the rope and then use the ruler to measure the length of the rope). Measurement is necessary to straighten the rope, both ends in the same horizontal plane to ensure the accuracy of the reading. We can directly measure the height of the outside of the cup, the maximum diameter of the cup will be fine. Finally, the value is read in conjunction with the actual situation. Prepare for the selection of the size of the Cup Dispenser to avoid the purchase of a Cup Dispenser of the wrong size. If there are cups in the outer packaging has the size of the size can not be measured.
If you want to match your furniture, home decoration style, you can choose a suitable size of the Cup Dispenser. Tools to measure the appearance of the Cup Dispenser are soft rulers (you can use a string with a straight edge instead). The first step is to measure the height of the cup dispenser. Note that the measurement to keep the soft ruler (rope) is straight, and the head and tail to the same level, otherwise the measured value will not be accurate enough. The second step is to measure the maximum width of the fixed surface. The third step is to measure the minimum width of the fixed surface. The fourth step is to determine the specific location of the maximum and minimum widths of the fixed surface in height. This way you can get how much fixing area you need to leave for the Cup Dispenser.
Measurement inside the cup dispenser
This step is more difficult for us to prepare tools such as a soft ruler (you can use straightedge and string instead) and small stones. Fix the small stone with double-sided tape on the end of the soft ruler or string, and then stick the soft ruler or string inside the cup dispenser to get the height of the inside of the Cup Dispenser. Note that the volume of the small stone can not be too large, not to make the soft ruler or rope deformation; weight can not be too small or the soft ruler or rope can not be completely straight will produce errors. Measuring the internal width of the Cup Dispenser is easier than measuring the height, we just need to remove the dust cover to measure the diameter of the empty part. This way we measured the height and width of the interior of the Cup Dispenser.
These are the steps and methods needed to measure the Cup Dispenser, which can help us find a more suitable one. If you need Cup Dispenser, you can consider our cost-effective products.