











Your home disposable cups are placed where, is not particularly easy to mess, bad clean-up and unhygienic? Now we recommend a Cup Dispenser, which is convenient and does not take up space for a variety of places. Take the lid of the Cup Dispenser design beautiful dust cup, not waste more health. It is a large capacity, do not always have to stare at the cup is enough, card grip design, each time you take a bottom buckle can be stuck in the cup body gently pulled down. Do you know how to use the Cup Dispenser?
Here is the content list:
•Function principle and method
•Installation of the Cup Dispenser
•How to clean the Cup Dispenser?
Cup Dispenser is a card grip design, each time you take one, the bottom buckle can be stuck in the cup gently pulled down, so that is convenient and hygienic, will not contaminate the above disposable cups not used more quickly and conveniently. We just need to open the lid on the top of the Cup Dispenserto put the paper cups, which can be easily organized and stored. And the cup holder is easy to install, it can be easily fixed to the machine or wall side of the machine.
There are two kinds of Cup Dispenser installation, one is the Cup Dispenser that needs to be punched and the other is the Cup Dispenser that does not need to be punched, each of these two kinds has different advantages. Do not need to punch the Cup Dispenser use upgrade glue, even if we pull hard will not fall off, very suitable for tile glass, walls, wood, latex paint surface, and so on. The other one is to punch holes for installation, we need to find the location where you want to place the Cup Dispenser, and then use your hands to fix the Cup Dispenser in the wall to find the location of the need to punch a hole and then make a mark to prevent it from being installed crooked. After finding the right location, use the screws to fix the Cup Dispenser on it.
First of all, we need to remove the Cup Dispenser before cleaning, we can use a screwdriver to unscrew the screws, and then you can take off the dispenser, if you use a non-perforated dispenser, we can gently tear off the glue used to fix the Cup Dispenser. Then use the cleaner (disinfectant water, toothpaste, detergent, and other cleaners can be) with a small brush with water to gently brush the surface of the Cup Dispenser and inside. After brushing, remember to dry the water before you can continue to use it. Finally, use the method of installing the Cup Dispenser to install it on.
These are the methods of how to use the Cup Dispenser. With the popularity of Cup Dispensers in our lives, it is necessary for us to know these methods. If you need Cup Dispenser, you can consider our cost-effective products. HOMASTER materials are non-toxic and tasteless, perfect after-sales service, you can have no worries.
In our daily life and work, Water Bottle Shelf for offices is a piece of very common company equipment. Therefore, we are no strangers to Water Bottle Shelf for office. But, do you know how to clean and maintain Water Bottle Shelf for offices? Next, let's take a look at the cleaning and maintenance of the Water Bottle Shelf for offices. Here are some answers.
Here is the content list:
How to Clean Water Bottle Shelf for office?
How to maintain Water Bottle Shelf for office?
First, scrub the Water Bottle Shelf for offices with clean water and dry it with a soft cotton cloth. Do not use any abrasive cleaners, cloth or paper towels, and any acid-containing cleaners, polishing abrasives or cleaners, or soaps. Wipe the surface of the Water Bottle Shelf for offices. Second, you can use a cotton damp cloth coated with toothpaste and soap, wipe it gently, and then wash it with water. Third, you can use wax oil with a strong decontamination ability and apply it on a clean white cotton cloth to thoroughly clean the entire product. The cycle is generally 3 months, which can extend the life of the Water Bottle Shelf for offices. Remember to wipe off the water stains after each cleaning, otherwise, water stains and dirt may appear on the surface of the pendant.
Fourth, the long-term residual chrome-plated surface of various detergents and shower gels will degrade the surface gloss of the Water Bottle Shelf for offices and directly affect the surface quality. Therefore, to clean the surface of the Water Bottle Shelf for offices, it is best to use a neutral detergent. Fifth, for stubborn dirt, surface scale, and stains that are difficult to remove, please use mild liquid detergent, colorless glass cleaning fluid, or non-abrasive polishing fluid and then rinse the Water Bottle Shelf for office and wipe dry with a soft cotton cloth.
First, develop the habit of opening doors and windows frequently. This will not only keep the air in the office unblocked but also keep the office dry, which will help you and your staff’s health and absorb more fresh air. Second, the surface of the Water Bottle Shelf for offices should be wiped with a soft cotton cloth and water frequently to ensure a bright luster. Never use corrosive acid-base solutions, and try not to clean them with detergent. Thirdly, if we are decorating, we must not let the paint get on the Water Bottle Shelf for offices, because the paint has a great corrosive effect on the coating on the surface of the Water Bottle Shelf office.
Our official website is https://www.homaster.com/. If you are engaged in work related to Water Bottle Shelf for offices or want to learn more about our company, you can communicate with us on the website. Our cost-effective products are well received by everyone.
Cup Dispenser is a storage tool for storing cups, which is widely used in supermarkets, restaurants, schools, cafeterias, and other places. More and more Chinese families will use the cup dispenser, and it will be one of the daily household storage products in the future. The Cup Dispenser sold by our company is not easy to produce corrosion, pitting, rust, wear resistance, durable, magnificent and bright appearance, fashionable and durable. It can add design color to the bland and tasteless life. So how do we measure the Cup Dispenser?
Here is the content list:
•Measurement of the cups
•Measurement of the appearance of the cup holder
Prepare the cup you want to store, measuring tape (if the cup is relatively small it is recommended to use a soft ruler to measure, the data obtained will be more accurate, if there is no soft ruler can first measure the length of the rope and then use the ruler to measure the length of the rope). Measurement is necessary to straighten the rope, both ends in the same horizontal plane to ensure the accuracy of the reading. We can directly measure the height of the outside of the cup, the maximum diameter of the cup will be fine. Finally, the value is read in conjunction with the actual situation. Prepare for the selection of the size of the Cup Dispenser to avoid the purchase of a Cup Dispenser of the wrong size. If there are cups in the outer packaging has the size of the size can not be measured.
If you want to match your furniture, home decoration style, you can choose a suitable size of the Cup Dispenser. Tools to measure the appearance of the Cup Dispenser are soft rulers (you can use a string with a straight edge instead). The first step is to measure the height of the cup dispenser. Note that the measurement to keep the soft ruler (rope) is straight, and the head and tail to the same level, otherwise the measured value will not be accurate enough. The second step is to measure the maximum width of the fixed surface. The third step is to measure the minimum width of the fixed surface. The fourth step is to determine the specific location of the maximum and minimum widths of the fixed surface in height. This way you can get how much fixing area you need to leave for the Cup Dispenser.
Measurement inside the cup dispenser
This step is more difficult for us to prepare tools such as a soft ruler (you can use straightedge and string instead) and small stones. Fix the small stone with double-sided tape on the end of the soft ruler or string, and then stick the soft ruler or string inside the cup dispenser to get the height of the inside of the Cup Dispenser. Note that the volume of the small stone can not be too large, not to make the soft ruler or rope deformation; weight can not be too small or the soft ruler or rope can not be completely straight will produce errors. Measuring the internal width of the Cup Dispenser is easier than measuring the height, we just need to remove the dust cover to measure the diameter of the empty part. This way we measured the height and width of the interior of the Cup Dispenser.
These are the steps and methods needed to measure the Cup Dispenser, which can help us find a more suitable one. If you need Cup Dispenser, you can consider our cost-effective products.
A Water Purifier is water treatment equipment that performs deep filtration and purification of water according to the requirements of water use. A Water Purifier usually refers to a small purifier for household use. The core of its technology is the filter membrane in the filter element device. The main technology comes from three types of ultrafiltration membranes, RO reverse osmosis membranes, and nanofiltration membranes. Next, follow me to take a look at the filtering and classification of Water purifiers.
Here are some answers.
Here is the content list:
Water Purifier filtration.
Classification of Water Purifier.
Generally, ultrafiltration machines and pure water machines are used in households, and the standard number of filtration stages is 5. Under normal circumstances, after filtering through the Water Purifier, the water can reach the standard of pure water, and the water does not contain any impurities. This water can be used directly for drinking. Water Purifier differs according to the filter element combination, and the level of filtration is also different. In line with water purification technology, Water purifiers are divided into filtration, activated carbon adsorption, membrane technology, electrolysis technology, dissolution, mineralization, magnetization, etc. Of course, what involves membrane technology is the core of Water purifiers, and it is also the core embodiment of water purifier products.
Water Purifiers are divided into 2 classes in line with the pipeline style grade: step-by-step adjustment Water purifiers and self-cleaning Water purifiers. The normal Water setup may be a step-by-step adjustment Water setup. Its internal pipeline is designed to be loose before the filter element is tightened. There are PP melt blown filter elements, granular carbon, compressed carbon, RO reverse osmosis membrane or ultrafiltration membrane, and post activated carbon. The 5 levels are connected end to end in sequence. The retentate is deposited within the filter component and wishes to be manually disassembled and washed frequently to confirm the traditional operation of the machine.
The other may be a lot of advanced self-cleaning Water setup. Two channels square measure designed within the Water Purifier and a laundry water channel are other. It is used as washing water for ordinary daily life. When passing through the passage, it flushes the internal filter element, especially the raw water side of the membrane filter element to achieve self-cleaning, and uses the moment when the faucet is opened and closed, that is, the water that flows away from the first and the end of the faucet to remove the trapped dirt in time. This structure is designed reasonably, eliminating the trouble of manual disassembly and washing, avoiding re-pollution of the organization itself, and at the same time, reducing energy consumption costs.
In layman's terms, the self-cleaning Water Purifier is equivalent to a garbage disposer installed in the pipeline, and the dirt is removed at any time without staying in the machine. The traditional non-self-cleaning Water Purifier is equivalent to putting multiple trash cans in the room, and the dirt is usually temporarily stored in the machine, thus it has to be drained, removed, and washed frequently, and also the filter component has to get replaced ofttimes.
Our official website is https://www.homaster.com/. If you are engaged in work related to Water Purifier or want to learn more about our company, you can communicate with us on the website. Our company adheres to the corporate culture of "quality-oriented, customer first", and has always made unremitting efforts to become a professional Water Purifier supplier in the industry.